Perforated 24V heating film, fleece-laminated, 17cm wide, 130W/m² - Ideal for mould prevention
The Mi-Heat low-voltage heating film 17 cm perforated is an innovative, effective and inconspicuous solution for mould prevention. Thanks to its simple installation and high efficiency, it offers a sustainable way of drying damp walls and protecting health and the fabric of the building.
Mould loves water and finds ideal conditions to spread in damp house walls. This can be caused by a lack of or incorrect insulation, leaks or cracks in walls, roofs and windows, incorrect heating and ventilation and condensation of humidity on cold walls. A permanently installed heating solution such as our narrow heating film can provide an effective remedy in such Areas.
Our perforated Mi-Heat low-voltage heating film with a width of 17 cm is one of the thinnest variants of electric heating systems and is specially designed to prevent mould. This innovative heating solution is ideal for areas that are permanently at risk from high humidity, such as corners on external walls, window reveals, basements or bathrooms. With an output of 130 W/m², it is ideal for temperature control and can be installed behind tile adhesive, on plasterboard or directly in the wall plaster (gypsum plaster, clay plaster, textured plaster, etc.) so that it disappears invisibly into the room. The fleece lamination and even perforation make it extremely easy to apply. By heating the affected surfaces, the heating films remove the moisture from the mould spores and thus the breeding ground for their development.
Our heating mats use natural infrared heat to sustainably dry out the wall down to the core, eliminating existing mould and preventing new growth. The heating films consist of two copper strips that supply an electrically conductive carbon coating on a carrier material. As soon as a voltage (either DC or AC) is applied to the copper strips, the carbon material heats up and emits long-wave infrared radiation with an IR wavelength of 7-14 micrometres (IR-C radiation). Almost the entire surface of the heating films heats up extremely evenly, ensuring homogeneous heat distribution. Compared to other electrical heating systems, the energy used is converted into heat without major losses, which makes the heating films very efficient.
Properties:
- Low installation height - only 0.4 millimetres
- Perforated and fleece-laminated - facilitates processing
- Easy, quick and safe Installation
- Consistent surface temperature
- Homogeneous heat Distribution
- Reduced mould Formation
- Very high energy Efficiency
- Maintenance-free, robust and reliable
- Made in Germany
Technical data:
Operating voltage: 24 volts
Max. Power consumption: 130Watt/m² +/-10%
Heating surface per m²: 82%
Track width: 17cm
Active area: 14cm
IR wavelength: 7-14 micrometres
Temperature resistance: up to 100°C
Efficiency: 98%
Max. Track length: 8 metres in one piece
Can be shortened: Yes, as required
Material thickness: 0.4 mm
Insulation: 4-ply, 1-layer insulation
Note: A suitable voltage source (e.g. AC transformer or DC power supply unit) and a suitable thermostat with external temperature sensor are required for a complete heating solution. The thermostat thus provides thermal monitoring of the heating film and also ensures that the temperature is limited to the maximum temperature specified by the flooring manufacturer.
Deutsch
