Efficient Warmth Against Fog – Mirror Heating Film for Bathroom & Living Area
The electric mirror heating film is the clever solution to retrofit existing mirrors in bathrooms, toilets, or wellness areas with an effective anti-fog function. The thin heating film is mounted directly on the back of an existing mirror and reliably prevents fogging after showering or bathing – for clear visibility at all times and more comfort in everyday life.
The mirror heater works with modern infrared technology, which distributes the heat evenly over the mirror surface. No air turbulence or noise is generated. Installation is quick and uncomplicated: the heating film is attached to the back of the mirror using temperature-resistant adhesive tape and then connected to the 230 V power supply.
Note on installation: The heating film must be switched – ideally together with the mirror lighting or via a separate light switch, so it can be conveniently turned on and off as needed. A thermostat is not required for this application.
Important for selection: The heating film should be at least 4 cm smaller than the mirror surface all around to allow enough edge space for secure attachment with adhesive tape.
You will receive the selected length of infrared heating film in widths of 25, 30, 50, or 80 cm. The heating output per running meter is:
- 25 cm width: 55 watts per meter
- 30 cm width: 67 watts per meter
- 50 cm width: 80 watts per meter
- 80 cm width: 112 watts per meter
Thanks to its slim design, the film is ideal for renovations or new installations – whether in the bathroom, guest toilet, or private wellness area.
Features:
- No more fogged mirrors: Clear view after showering
- Various widths available: 25, 30, 50, or 80 cm – precisely fitting your mirror surface
- Flexible heating power: Up to 112 watts per running meter, depending on width
- Easy retrofitting: Can be adhered directly to existing mirrors
- 230 V connection: Can be controlled via light switch or mirror lighting
Technical data:
Operating voltage: 230V/50Hz
Max. power consumption: 55W/m at 25cm width, 67W/m at 30cm width, 80W/m at 50cm width, 112W/m at 80cm width
Heating area per m²: 74%
Film width: 25cm, 30cm, 50cm, 80cm
IR wavelength: 7–14 micrometers
Temperature resistance: up to 80°C
Efficiency: 98%
Can be shortened: Yes, every 25cm
Material thickness: 0.366 mm
Insulation: 2-layer, single insulated
Connection cable: open cable ends, 1.25m length
| Item information |
Value |
| Shipping weight: |
0,16 kg
|
Product safety information
| Manufacturer information: |
Mi-Heat Heizsysteme GmbH
Ol Streek 39a
Aurich, Deutschland, 26607
info@infrarot-fussboden.de
https://infrarot-fussboden.de |
There are no reviews yet.
Deutsch