The Mi-Heat primer is safe and money-saving. Applied to absorbent, moisture-sensitive surfaces, this product forms a protective layer after drying and curing. The blue color marks worked to ensure even application.
This layer protects the surface against moisture, solidifies the surface and improves the adhesion.
Mi-Heat primer seals concrete and screeds to prevent dust formation and simplify afterward maintenance, thus ensuring a low-abrasion screed surface.
Manufactured according to standard of ISO 9002 / EN29002 "Quality Assurance Systems Part 2. Quality Assurance Level for Products and Assembly".
SCOPE OF APPLICATION:
Mi-Heat primer is suitable for indoor and outdoor use.
For the treatment of gypsum plaster, gypsum boards, gypsum plasterboards, gypsum fiber boards, gypsum plasterboard and mastic asphalt floors before laying ceramic or natural stone tiles and mosaics.
For the treatment of aerated concrete, sand-lime brick, cement plaster, concrete and brickwork prior to the application of Kalkgipsputzen.
For sealing and solidifying screeds to prevent abrasion and dust formation. Use on anhydrite (heating) is possible without any restrictions.
- Improves the strength and load-bearing capacity of the substrates and increases the adhesion of tiles
- improves adhesion and prevents the formation of shrinkage cracks
- Control color blue; allows good area control
- Protects calcium sulfate / anhydrite screeds from ettringite formation
The substrate must be firm, clean, free from dust, grease, oil, old paint, wax and other contaminants that may affect adhesion. Do not use solvents to remove surface contamination.
Solidification and sealing of concrete and cement screeds
Dilute the primer 1: 1 with water and apply with a brush. After drying, a second, undiluted, layer is applied
Content: 1 liter
Mixing ratio: 1: 1
Room size: approx. 10m²
Processing temperature: + 5- + 35 ° C
Drying time: 15-25min
Consumption: 70 - 100 gr./m²