Priming Set: 1L Mi-Heat Bonding & Protective Primer + Paint Roller Set
With this practical priming set, you get everything you need for the perfect preparation of your floor. The Mi-Heat Bonding & Protective Primer improves the adhesion of floor coatings on various surfaces, while the paint roller set ensures an even and effortless application.
Optimal Surface Preparation for Heating Systems & Floor Coverings
The Mi-Heat Bonding & Protective Primer is a high-performance adhesion promoter for both absorbent and non-absorbent surfaces. It reduces absorbency and enhances the adhesion of adhesives, levelling compounds, screeds, or directly applied floor coverings.
The included paint roller set makes it easy to apply the primer evenly and ensures a clean finish. The paint tray allows precise dosing, prevents unnecessary material waste, and facilitates application without drips or splashes.
Suitable Surfaces for the Priming Set:
✔ Concrete & Screed – improves adhesion of floor coverings and levelling compounds
✔ Tiles & Smooth Surfaces – enables secure bonding of new layers
✔ Wood & Drywall Panels – reduces absorbency and ensures even application
✔ Substrates for Electric Underfloor Heating – protects against moisture absorption and enhances adhesion of heating foils or mats
Easy Application in 4 Steps
1.) Preparing the Substrate
- The surface must be dry, clean, stable, and free of dust, oil, or other separating agents.
- Loose or highly absorbent surfaces should be thoroughly cleaned and, if necessary, mechanically prepared.
2.) Mixing & Preparation
- The Mi-Heat Bonding & Protective Primer is ready to use and does not need to be diluted.
- Stir well before use to ensure a homogeneous mixture.
3.) Applying the Primer
- Use the included paint roller to evenly apply the primer to the surface.
- Avoid puddling and ensure full surface coverage.
- The paint tray helps distribute the primer evenly and prevents material waste.
4.) Drying Time & Further Processing
- Drying time is approximately 1–2 hours, depending on room temperature and substrate conditions.
- Once fully dry, the surface can be further processed with levelling compounds, adhesives, or floor coverings.
Features of the Priming Set:
✔ All-in-one solution – primer + matching paint roller with tray
✔ Optimised adhesion – enhances the bond between the substrate & covering
✔ Easy to use – ready to apply & simple application
✔ Versatile compatibility – suitable for screed, tiles, and more
✔ Quick drying – ready for further processing within a few hours
With this priming set, you can optimally prepare your floor for the installation of heating systems or floor coverings – professionally, cleanly, and efficiently!
Technical Specifications:
Container size: 1 litre
Colour: Transparent after drying
Consumption: Approx. 50–200 ml/m², depending on Substrate
Drying time: Approx. 1 hour
Roller width: 11 cm
Roller diameter: 3.5 cm
Material: Polyester
Paint tray dimensions: 16 × 31 cm
Scope of Delivery:
1x Mi-Heat Bonding & Protective Primer (1L)
1x Paint roller frame 27×9 cm with 11 cm roller
1x Paint tray 16×31 cm
Deutsch
