Grounded Comfort Heating Foil
Heating foil, also known as carbon heating foil, is the thinnest version of electrical heat sources. It consists of two copper strips that supply an electrically conductive coating on a carrier material. Almost the entire surface within the heating foil heats up evenly and thus ensures pleasant heat emission over the entire laid surface.
Compared to other electrical heating systems, the energy used is converted into infrared rays with almost no loss, which is what makes the infrared heating foil so efficient.
The heating foil can be attached to the wall or ceiling without much construction work.
The infrared heating foil is well suited for cold walls to reduce mould formation or to temper the living space. In addition, it is well suited for ceiling mounting, where it can be used as a full-fledged heat source. In combination with e.g. a stretch ceiling, you get an efficient and visually appealing ceiling!
This foil is provided with a 54.5 cm wide aluminium film, which is used as an earthing point. This serves to protect people so that the fuse is blown out in the event of electrical contact.
- 54,5cm wide earthing
- Low installation height and weight, space-saving
- Simple, quick and safe Installation
- Uniform surface temperature
- Flexible, robust and reliable
- Prevents mould growth
- Very high energy efficiency
- Anti-allergic room climate
- Low acquisition Costs
- Homogeneous energy Distribution
Operating voltage: 220-240 volts
Max. Power consumption: 180 Watt/m² +/-10%
Heating surface per m²: 74
Path width: 90cm
Active area: 86,5cm
IR wavelength: 7-14 microns
Temperature resistance: up to 80°C
Max. Web length: 8 metres in one piece
Can be shortened: Yes, every 30cm
Material thickness: 0.366mm
Insulation: 2-ply, 1-ply insulated
When using electric underfloor heating, a thermostat that allows an adjustable temperature limit of 26°C must be used for control.
When using electric heating elements, ensure that the surface covering has the appropriate thermal conductivity.
A manufacturer's approval must be obtained in advance by the customer.
The installation of electrical heating systems may and must only be carried out by a specialist in accordance with VDE DIN 100.
Heating foil wattage and its use:
Vinyl = 60-80 watts/m²
Laminate/parquet = 60-130 watts/m²
Wall/ceiling and individual projects = 160-220 watt/m²