Electric underfloor heating
The carbon heating foil is the thinnest version of the available electric underfloor heating systems. It consists of two copper strips that supply an electrically conductive coating on a carrier material. Almost the entire surface within the heating foil heats up evenly and thus provides a pleasantly warm floor over the laid surface. Compared to other electrical heating systems, the energy used is converted into heat without much loss, which makes the infrared heating foil very efficient. The generated and harmless infrared radiation directly heats the objects above it (e.g. the floor covering), whereby no air turbulence occurs.
The heating foil offered here in 25cm width is intended for use on the ceiling or special projects.
Operating voltage: 230Volt
Power consumption: 220Watt/m²
Total width: 25cm
Active area: 23cm
IR wavelength: 7-14 microns
Temperature resistance: up to 80°C
Max. Web length: 12 metres in one piece
Can be shortened: Yes, every 25cm
Material thickness: 0.366 mm
Insulation: 2-layer, 1-fold insulation
Scope of delivery
Heating foil with ready-made 2.5m connection cable
1x assembly instruction
When using electric underfloor heating, a thermostat that allows an adjustable temperature limit of 26°C must be used for control.
When using electric heating elements, ensure that the surface covering has the appropriate thermal conductivity.
A manufacturer's approval must be obtained in advance by the customer.
The installation of electrical heating systems may and must only be carried out by a specialist in accordance with VDE DIN 100.
Heating foil capacity and its use:
Vinyl = 80 watts/m²
Laminate/parquet = 80 - 130 Watt/m²
Wall/ceiling and individual projects = 160 - 220 watt/m²