Solder butt connector for connecting cable with 1.5mm² wire cross-section
With the solder connectors, two connection cables can be easily and quickly joined together to form a tension-proof and moisture-proof cable connection. The stripped wire ends are simply inserted into the connector and the solder ring is then melted with a hot air blower. The heat-melting polymer hose and the two thermoplastic sealing rings also ensure that the cable is properly electrically insulated.
The cable connector has been specially developed for making electrical connections, it provides a qualitative, reliable, watertight and durable connection. The transparent material also makes it easy to visually check the connection made.
The connector can be used for flexible (braided) and rigid (solid) copper or tin-plated wires. Thanks to its small diameter, the butt connector is ideal for extending the connection cables of infrared heating films.
- Soldering, insulating, sealing in just one operation
- Double solder ring for perfect, full-surface soldering
- No measurable voltage loss
- Suitable for flexible and rigid conductors
- Fast installation with the hot air blower or lighter
Shrink ratio: 3:1
Insulation sleeve: Heat-shrinkable, transparent, radiation-crosslinked, modified polyolefin
Sealing rings: heat-resistant stabilised thermoplastic
Solder rings: 2 rings Sn42Bi58 (ANSI J-STD-006)
Flux: ROL1 (ANSI J-STD-004)
Melting temperature solder alloy: > 140° C
Temperature resistance: -55°C to +125°C
tensile strength: min. 10 N/mm²
Dielectric strength: 2 kV/mm
Voltage drop: max. 2 mV
Volume resistance: < equal to the length of the wire
RoHS conformity: yes
Suitability wire cross section: min 0.8 / max 2.0mm²
Dimensions (L/Ø): approx. 4cm / approx. 4mm