Corrugated plastic conduit with brass sleeve for temperature sensor – 2.6 m length / 13 mm Diameter
Our plastic corrugated conduit with brass sleeve is the space-saving solution for the professional installation of a temperature sensor in indoor electric heating systems. It is universally suitable for applications on floors, walls, and ceilings and is particularly advantageous when the installation depth needs to be as shallow as possible.
Due to the smaller 13 mm diameter, the cutout or recess needs to be less deep than with a standard corrugated tube of larger diameter. This makes retrofit installations or applications with limited space particularly easier. At the same time, the temperature sensor remains cleanly protected and can be replaced later if necessary without having to open the heating Surface.
The brass sleeve at the end of the tube ensures fast and highly accurate temperature transfer to the temperature sensor. This allows the sensor to reliably measure the temperature and transmit it to the thermostat. The closed sleeve also prevents leveling compound, tile adhesive, plaster, or other building materials from entering the tube.
For a clean installation, we recommend laying the corrugated pipe in such a way that the temperature sensor can be easily inserted later and removed again if necessary.
Technical Specifications
Material: Corrugated plastic tubing with brass sleeve
Length: 2.60 m
Diameter: 13 mm
End sleeve: Brass
Suitable for: Indoor electric heating systems, e.g., floor, wall, and ceiling heating Systems
Special feature: Shallow installation depth and rapid heat transfer
Scope of delivery
1x 2.6 m corrugated plastic pipe
1x brass sleeve
Deutsch