Power Controller 3500W Dimmer
With our power controller you can control your dark radiator, light radiator, heating carpets, heating mats and other heating elements optimally. With the help of the stepless buttons, the desired temperature/power can be perfectly adjusted to your needs. Furthermore, you can control various electrical appliances with the voltage regulator. Through the included remote control, you can set 4 stored powers of 25%, 50%, 75% and 100% directly at the touch of a button. Furthermore, you have the possibility to adjust the power with the + and - button on the remote control individually to your needs.
The power controller has an LCD display and can also be adjusted directly on the device in its output power between 0 and 100 steps with the + and - button in each case. The setting is retained even after switching off or after a power interruption.
Ohmic loads: heating panels, electric heaters, air conditioners, soldering irons, light bulbs. (not energy saving lamps and fluorescent tubes).
Inductive loads: drills, grinders, kitchen machines, vacuum cleaners.
Note: Appliances with starting capacitors must not be connected.
Attention: When regulating pumps or motors, it is imperative to note that the starting or inrush current is many times higher than indicated on the nameplate of the device. Thus, the inrush current must first be determined so that the dimmer is not overloaded.
- Variable control at the touch of a button on the device.
- Suitable for outdoor use
- 4 preset power levels of 25, 50, 75 and 100%
- Remote control with a range of about 10 meters
- LCD display
- Operating voltage: 230V
- control range output voltage: 10-230V, at constant frequency (50/60 Hz)
- Max. connectable load: up to 3500 Watt
- Dimming method: Phase angle control suitable for resistive or inductive 230V/AC loads.
- protection class: IP54
- Dimensions: 160x120x75mm
- connection cable: 1,4m
Scope of delivery:
1x power controller 3500Watt
1x German operating instructions
1x remote control without battery (CR-2025 required)