EcoTWIN heating cable with 12 W/m – for electric underfloor heating
The EcoTWIN heating cable with 12 W/m offers a flexible, safe and efficient solution for electric underfloor heating. With its low installation height of only 4 millimetres, it is particularly suitable for renovations, retrofits and energy-efficient new buildings where there is little space available for floor construction. The heating cable is completely enclosed by being embedded directly in an adhesive or levelling compound. This ensures even heat distribution, optimised heat conduction and a stable surface that forms an ideal base for almost all floor coverings – from tiles and laminate to modern design coverings.
One major advantage of heating cables is their high adaptability. Unlike heating mats, their installation is not restricted by a fixed carrier fabric. The loose Mi-Heat Twin heating cable can be laid with a loop spacing of 6 to 12 cm, allowing the heating output per square metre to be flexibly adjusted. This allows different heating zones to be created in specific areas – for example, with a narrower spacing in front of the washbasin or along colder exterior walls. It is important that the minimum spacing of 6 cm is not exceeded in order to ensure safe and efficient operation. Depending on the installation situation, the heating cable is fixed in place using mounting tape, adhesive tape, hot glue or mounting adhesive, so that even complex floor plans can be implemented without any problems.
Thanks to modern twin-conductor technology, the EcoTWIN heating cable only needs to be connected to the mains on one side. This greatly simplifies installation, as unlike older cable types, both the start and end of the heating cable do not have to be connected. The single-sided connection saves time, minimises installation effort and at the same time reduces the installation height in the transition area. This is a clear advantage, especially in existing buildings or rooms with lots of nooks and crannies.
The heating cable also impresses in terms of safety: the surrounding protective conductor braid and the high IP protection class allow it to be used without hesitation in damp rooms such as bathrooms. This means that comfortable and energy-efficient underfloor heating systems can also be installed in these areas. In combination with a suitable thermostat, the result is a powerful and convenient heating system that can be precisely controlled and provides pleasant warmth.
The EcoTWIN heating cable is therefore a durable, flexible and modern solution that not only offers a high level of comfort, but also provides a safe and efficient heating solution for a wide range of applications.
Features:
- Flexible installation – also ideal for corners, curves and stairs
- Flat design – perfect for renovations and new builds with limited space
- Single-sided connection – easy installation thanks to twin Technology
- Versatile – for tiles or in levelling compound
- Safe to use – also approved for damp rooms such as bathrooms
- Efficient heat – even distribution thanks to full-surface embedding
- Reliable & durable – robust technology for lasting comfort
Specifications:
Operating voltage: 230V
Max. Power consumption: 290Watt
Heated area: 2-2,9m² depending on the loop distance
Cable diameter: 4mm
Max. Operating temperature: 80 ° C
Length of connection cable: 3.0 meters
IP degree of protection: IPX7
Minimum bending radius: 30 mm
Loop spacing: 6-12 cm
Scope of delivery:
1x Mi-Heat Twin heating cable 24 m
1x assembly instructions
Deutsch
