Twin Heating Cable for Screed as Electric Underfloor Heating
The Mi-Heat Twin Heating Cable is supplied with a 3m long connection cable (PTC thermistor). The twin heating cable has a power consumption of 17W per running meter.
This Mi-Heat Heating Cable is a genie when it comes to unconventional floor forms, e.g. niches, corners, columns, steps, stairs, pedestals, narrow spaces, semicircular spaces, and winter garden etc.
Mi-Heat Twin Heating Cable can be installed with a loop distance of 7-14cm. This flexible distance allows you to adjust the heating capacity per m² to your needs. To fix heating calbe please use either adhesive tape, hot glue or mounting adhesive. The loop distance should be at least 7cm.
Scope of Application
- for screed
- under tiles
- electric underfloor heating
- winter gardens
- and other uses
*construction height should be at least 40mm
pre-assembled, with 3 m PTC thermistor cable on one side only
can be installed beneath all floor coverings such as tiles, stone, wood, laminate, carpet, cork, PVC, etc.
completely maintenance-free and wear-free
ideal for rooms of various designs
every Mi-Heat heating cable is subject to strict quality and functional tests
High Quality: manufactured in accordance with the VDE standard -DINEN60335-2-96, DIN EN60335-1 and DIN EN50366. Approval: VDE (heating conductor)
operating voltage: 230V
max. power consumption: 17W/m
heated area: 4,8-7,2m² depending on the loop distance
cable diameter: 8,0mm
max. Operating temperature: 80 ° C
length of connection cable: 3.0 meters
IP protection: IP67
min. bending radius: 30mm
loop distance: 7-14cm
1x Mi-Heat Twin heating cable 42 m
1x assembly instructions
The Mi-Heat Twin Heating Cable must be operated through a thermostat. The threshold temperature of this thermostat should be at least 30° C.