Winter on the building site? No reason to stop work!
Mobile heating systems for smooth operations during the colder months
Falling temperatures, frost and frozen ground can make everyday work on a construction site considerably more difficult. Water pipes can freeze, building materials can no longer be processed as usual, and excavation work may come to a standstill due to frozen ground. At the same time, low temperatures in site cabins and break rooms create uncomfortable working conditions.
However, it is not always necessary to heat the entire construction site. In many cases, it is sufficient to provide heat exactly where it is actually needed. Mobile electric heating systems offer a particularly flexible and straightforward solution for this purpose. By heating individual areas as required, unnecessary energy losses can be avoided while important work processes can continue even in winter conditions.
Requirements on construction sites often change regularly. Pipes are installed, work areas shift, and temporary facilities are dismantled again after only a few weeks. This makes heating solutions that can be installed quickly, removed easily and reused at another location all the more important. Robust, portable heating systems are therefore especially practical, as they do not require extensive structural modifications and can be adapted flexibly to new areas of use. Once purchased, they can be used on different construction sites over many winters.
We show you how the right heating systems can help you protect pipes from frost, keep materials at the required processing temperature, thaw frozen ground and maintain comfortable temperatures in site cabins.
Frost protection for pipework – quick to install and versatile
Water and supply pipes are among the areas on a construction site that are particularly vulnerable to frost. Whether temporary fresh water supplies, mobile sanitary facilities or supply lines running between different site cabins: As soon as temperatures fall below freezing, there is a risk that water-carrying pipes may freeze and, in the worst case, become damaged.
A permanently installed pipe trace heating system is often not practical for this type of temporary installation. After all, many pipes are only required for a limited period and are dismantled again afterwards. A practical alternative is provided by our electric pipe heating jackets. These are simply wrapped around the existing pipe and secured using the integrated hook-and-loop fasteners. No complex installation work or additional fixing materials are required.
Inside the jacket, a self-regulating heating cable provides temperature-dependent heat output. The integrated thermal insulation reduces heat loss to the surroundings and supports efficient, targeted heating of the pipe.
The high level of flexibility is particularly practical: our pipe heating jackets are available in various lengths from 5 to 25 metres and are suitable for pipe diameters of up to 50 mm. For larger pipe diameters, several jackets can be combined using their hook-and-loop fasteners. Longer sections of pipe can also be heated by installing several jackets one after another.
Once the construction work has been completed, the jackets can simply be opened, rolled up and stored until they are needed again. A suitable thermostat control ensures demand-based heating during operation.
Drum heater – reliably maintaining the temperature of operating fluids and building materials
Not only pipes, but also many operating materials and consumables used on construction sites are sensitive to low temperatures. Oils and lubricants, for example, can become significantly more viscous in cold conditions, making pumping, dosing or processing more difficult. Certain liquid construction materials and chemical products must also be stored and processed within specified temperature ranges in order to maintain their intended properties.
This is where drum heaters or heating jackets are used. These systems, specially designed for heating containers, are wrapped around the outside of the respective container and secured with quick-release fasteners. The integrated electric heating elements warm the container and its contents. An additional insulation layer reduces heat loss, while an adjustable temperature controller allows the heating level to be adapted to the specific requirements.
Our drum heaters are available for different container sizes – from compact 25-litre containers to 50- and 200-litre drums, as well as large 1,000-litre IBC containers.
This makes it possible to protect temperature-sensitive liquids from cooling down excessively or to bring them to the required processing temperature. Naturally, the respective substance must be suitable for heating and the permitted temperature limits must always be observed.
Another advantage is their flexibility: the drum heaters can be removed easily when required and reused on another container. This makes them particularly practical for changing materials or temporary storage locations.
Thawing frozen ground – enabling earthworks even in winter
Long periods of frost can cause significant delays, especially in civil engineering and groundwork. Once the ground is deeply frozen, trenches, excavations or foundation areas can often only be dug with considerable effort. Mechanically breaking up frozen soil is time-consuming and labour-intensive and may require additional machinery or specialist tools. Simply waiting for warmer temperatures is also not an attractive option when construction schedules are tight.
Our electric ground thawing mats provide a practical way to heat frozen soil in a targeted manner. The mats are rolled out directly over the affected area and connected to a suitable power supply. The generated heat is distributed over a wide area towards the ground and gradually penetrates the frozen soil layers. Integrated thermal insulation on the top side reduces heat loss to the surroundings, helping to concentrate the heating effect on the ground below.
Whether for a small excavation for a house connection, a longer utility trench or a locally frozen area, the different mat sizes allow the system to be adapted to the respective work area.
Our models are available with heating outputs of up to 1,520 watts and feature a robust outer cover designed for demanding operating conditions. How quickly and how deeply the ground thaws depends on factors such as soil type, moisture content, frost depth and outside temperature.
After use, the mats can simply be rolled up again and transported to the next construction site.
Feeling comfortable in a site container – warm feet and pleasant room temperatures
In addition to protecting materials and supply lines, the well-being of employees naturally also plays an important role. After several hours of working in low outdoor temperatures, a warm break room is especially welcome. However, site cabins, temporary offices and temporary break rooms often cool down considerably when they are not in use.
A combination of targeted floor heating and rapid air heating can create a comfortable environment in these areas.
Warm feet with sturdy rubber heating mats
Anyone who spends long periods standing or sitting on a cold floor will know the problem: once your feet get really cold, your whole body can quickly start to feel chilled. Our electric rubber heating mats provide a simple solution. They are placed directly at the desired workstation or underneath a desk and provide targeted heat through the surface of the mat.
Thanks to their robust construction, the models designed for this purpose are also suitable for more demanding environments. Unlike more sensitive heating solutions, they are designed for practical and straightforward use. This makes it easy to provide comfortable foot warmth at seating areas in site cabins, workstations in temporary site offices or other suitable standing areas.
The heating mats do not require permanent installation and can simply be moved to another location when needed. They provide heat exactly where it is required, without having to increase the temperature of the entire room.
Convector heaters – quickly create comfortable room temperatures
While rubber heating mats provide targeted warmth for the feet, a convector heater is designed to warm the entire room air. This is particularly useful in site cabins that are only used occasionally and may cool down significantly over several days. A convector heater warms the room air directly. The warm air rises, while cooler air flows in and is heated in turn. This natural air circulation allows the room temperature to rise relatively quickly.
Infrared heating works differently. It emits most of its heat in the form of radiant heat and initially warms the people and surfaces in front of it. While this radiant warmth can be felt quickly, the room air itself is mainly heated indirectly via the warmed surfaces. In rooms that have cooled down considerably and need to be brought to a comfortable air temperature as quickly as possible, a convector heater is therefore often the more practical choice.
A suitable solution is our Ballu Rapid convector with a heating output of 2,200 watts. Thanks to modern inverter technology, the unit adjusts its heating output according to demand and allows precise temperature control.
The integrated weekly programme and Wi-Fi control are particularly practical for temporarily used rooms. If power and network access are available, the site cabin can already be brought up to temperature before it is needed. The convector can either be mounted on the wall or used flexibly as a freestanding unit with the supplied castors.
Mobile site heating – what should you look out for?
When selecting a suitable heating solution, heating output is not the only factor to consider. Especially under the changing conditions of a construction site, the operating environment, electrical safety and installation requirements should also be taken into account.
Only heating devices specifically designed for outdoor use or damp working environments should be used in such conditions. The required protection rating depends on the specific location and application.
A suitable construction-site power supply, the necessary protective devices and the protection of connection cables against mechanical damage are equally important.
By considering these points, you benefit from a flexible heating solution that can be adapted to changing requirements without major modifications.
Conclusion: Stay safe and flexible throughout the cold season with targeted heating
Whether for frost protection of supply lines, temperature control of sensitive materials, thawing frozen ground or providing comfortable warmth in site cabins, the requirements for construction-site heating are highly varied.
The key is to choose the right solution for each specific application. Instead of heating large areas unnecessarily, mobile electric heating systems can provide heat exactly where it is actually needed.
Especially on temporary construction sites, solutions that can be installed quickly, used flexibly and reused after the work has been completed offer clear advantages.
With our Mi-Heat heating systems, we offer a wide range of options to help reduce frost-related work interruptions, protect important materials and create more comfortable working conditions.
Do you need help choosing the right site heating system?
Whether you need a pipe heating jacket, drum heater, ground thawing mat or mobile room heater, we are happy to help you find the right heating solution for your specific application.
Discover our range of electric industrial heating systems or contact our team for individual advice.
Deutsch