Twin outdoor heating cable for de-icing outdoor areas
The Mi-Heat outdoor heating cable in twin design is the ideal solution for electric heating of outdoor areas when particular flexibility and a precise fit are required. Unlike outdoor heating mats on carrier fabric, the loose heating cable can be laid individually and is therefore ideal for complex shapes and winding areas. Typical locations for use are outdoor stairs, walkways, platforms and ramps (e.g. garage or wheelchair ramps) as well as narrow or irregular surfaces. The aim is to reliably keep areas free of snow and ice in order to reduce the risk of slipping and make paths safe to use even in winter.
Depending on the substrate, installation is carried out in two proven ways: either the heating cable is laid in prepared milled grooves or fixed at defined laying intervals using a separately available fastening tape. This allows curves, edge areas, steps and transitions to be neatly reproduced.
Technically, the system operates at 30 W per metre, which makes it easy to plan the total power required based on the cable length. The heating cable is designed for embedding in concrete, screed, mortar or under paving structures and is robustly constructed to withstand typical outdoor conditions. It is important to lay the cable correctly in accordance with the installation instructions – in particular, heating cables must not be crossed or overlapped so that the heat is distributed evenly.
Thanks to twin technology, the forward and return conductors are integrated into the same heating cable, so that the electrical connection is only made at one end. This simplifies installation and makes laying the cable much easier, even over longer or winding distances. For efficient operation, we recommend an external thermostat with a temperature and humidity sensor, which only switches on when there is an actual risk of slippery conditions, thus avoiding unnecessary energy consumption.
Features
- Maximum flexibility: Loose Mi-Heat Twin outdoor heating cable for precise heating of outdoor surfaces.
- For complex shapes: Ideal for steps, ramps, walkways, platforms and narrow and winding areas.
- Two installation methods: Installation in milled grooves in the substrate or fixing with separately available fastening tape.
- Predictable heating output: 30 W per metre – total output can be easily calculated based on the length of cable installed.
- Robust & durable: Suitable for embedding in concrete, screed, mortar or under paving structures in outdoor areas.
- Efficiently controllable: In combination with an outdoor thermostat (temperature/humidity sensor), the system only switches on when there is a risk of slippery conditions.
Technical data
Operating voltage: 230V
Power: 30W per metre
Max. operating temperature: 90°C
Min. operating temperature: -30°C
Heating cable length: 5m
Connection cable length: 5m
Cable diameter: approx. 7mm
IP protection class: IP67
Min. bending radius: 35 mm
Min. loop spacing: 6 cm
Scope of delivery
1x Twin outdoor heating cable in selected length
1x Operating instructions
| Item information |
Value |
| Shipping weight: |
1,50 kg
|
Product safety information
| Manufacturer information: |
Mi-Heat Heizsysteme GmbH
Ol Streek 39a
Aurich, Deutschland, 26607
info@infrarot-fussboden.de
https://infrarot-fussboden.de |
There are no reviews yet.
Deutsch
